Dongle Emulator For Aerosim Rc [NEW]

Most people generally have success using a 22-in-1 universal flight simulator dongle or similar. Don't know if it works with the Radiolink AT9 though. If it has a standard 3.5mm trainer port you could try to use that one as described in the manual.

As for the AT9 - most people generally have success using a 22-in-1 universal flight simulator dongle or similar when connecting the radios. Don't know if it works with the Radiolink AT9 though. If it has a standard 3.5mm trainer port you could try to use that one as described in the manual

It's very hard though since every single controller/transmitter/radio gives different output, along with all the different dongles/cables etc. and operating system that there is. So often it is unavoidable to do some manual setting up on the radio itself anyway.

I have some old 4 channel controller connected via (again, old) ATMega64-based USB "dongle" (really, it is embedded into controller case, so not exactly dongle). It shows at Windows as standard joystick (without any 3rd party drivers), but with unusual channel mapping (I don't know why): Throttle (left hand, vertical) is "X Axis", Yaw (left hand, horizontal) is "Rudder", Pitch (right hand, vertical) is "Y Axis" and Roll (right hand, horizontal) is "Throttle" according to windows standard "Game controller properties / Test".

I just got the Orange DRX transmitter from hobbyking with the simulator dongle package, and cannot get it to work/recognize it for free rider. I am running the latest Mac OSX as well. Just wondering if anyone knows if it is possible to use this with fpv freerider and if not, other simulators that would work!???

Connectez sans fil votre radio Spektrum DSMX / DSM2 à votre ordinateur, tablette Android ou appareil mobile Android et jouez à des jeux ou utilisez des simulateurs R / C compatibles. Aucun matériel ou logiciel supplémentaire n'est requis. Branchez simplement le dongle dans le port USB de votre ordinateur ou le port micro USB de votre tablette ou appareil mobile Android et vous êtes prêt à partir.

InstallationAppuyez sur le bouton d'affectation et maintenez-le enfoncé tout en insérant le dongle dans le port USB. La LED orange clignote à plusieurs reprises, indiquant que le dongle est en mode affectation.Suivez les instructions de l'émetteur pour mettre l'émetteur en mode affectation.La LED du dongle deviendra orange fixe une fois le processus de reliure terminé.L'émetteur est maintenant prêt à être utilisé dans le simulateur. 2b1af7f3a8